SERVICE BRAM

Our company provides professional gate repair services in Katowice and other towns in the Silesian region. Below, we present details about our offer in this regard, as well as our price list.


Roller garage and industrial doors are built to operate for years in demanding conditions. However, to extend their lifespan and enjoy fault-free operation of the doors, periodic maintenance work should be carried out. Avoiding malfunctions is much more effective than rectifying them – for this reason, you can count on our help in this regard.

Did you buy a roller shutter door from us a long time ago? Do you need new spare parts? Do you want to equip your door with additional accessories? Did you purchase your door from us without installation?

Call us on service hotline,
We will certainly provide you with technical support.

Our specialists are at your disposal. In case of an emergency, you can count on us not only on weekdays. See how truly professional and customer-oriented Sector gate repair services from Silesia work. We offer the help of qualified specialists, who have access to the latest industry knowledge and appropriate tools, you will always be satisfied with the work we do.

In the event of a sudden gate failure, vandalism, or attempted break-in, we offer a rapid and effective intervention.

For this purpose, we invite you to use our servicing services, which include:

Damaged Gate

If a car or other vehicle has crashed into the gate and dented the guide rail or bent the slats, these must be replaced without fail. To do so, please contact us and provide the following details:

  • gate colour
  • gate width
  • Profile height
  • number of damaged strips
  • Additionally, if possible, please send a photo of the damaged item.

Periodic review

Your gate will remain in good working order for years to come if you have it serviced by us at a time that suits you. And we provide a warranty on all the new parts we fit 12-month warranty.

Replacement of worn parts

If your gate is making more noise than usual, or if you hear worrying sounds, this could be a sign that something has seized up – for example, a bearing, guide rollers or broken hangers. Don’t wait until the last minute to get it repaired, when the door has already fallen down; give us a call sooner rather than later.

Engine failure

The gate doesn't want to lift up? It stops, for example, 1m above the ground? It lowers itself down. .
The gate motor will most likely need replacing. Before reporting the fault, please measure the width and height of the gate. This information will help us select the right motor for your gate, ensuring that the repair is carried out more quickly and requires only a single visit from our technicians.

Additional Remote

Do you need an extra remote for your gate? Has your old, well-used remote stopped working?
We’ll do our best to find the right remote control for you, but please send us a photo of your current remote.
If it is no older than 10 years, there is a chance we can match the original; otherwise, your only options might be a replacement part or, unfortunately, a full electronic replacement. This is because many companies change the frequency range of their receivers/transmitters after this period.

Electronics assembly

The batteries in the remote control have been replaced, but the control unit isn’t responding and the remotes aren’t working. Do you need a new control unit? Take a photo of your current one and send it to us – there’s a chance we can find an identical one or match a newer model from the manufacturer’s range. .

Installation of the emergency drive

You've bought a garage with a roller door, but the motor doesn't have an emergency drive, which you need. Provide us with the width and height of the door and we will:

  • We will find and match the right engine for you.
  • We will match the appropriate emergency brake handle.
  • We will install an additional security measure to access the emergency drive.

Additional security

There aren’t 100% safety measures, but there are some that will help us or make our lives easier. To this end, we distinguish between two types of safety measures:

1- hindering burglary

Here we suggest installing, for example, bolt-hangers, also known as bolt-locks, which make it more difficult to lever up the gate.

2 – before damage:

to health and life
b-gates or property e.g. a car


Here we offer:
a – the inertia brake, which is designed to ensure that the armour does not fall suddenly if the engine is damaged, preventing injury to people or damage to anything.
b – photocells that will stop the gate from closing if an obstacle appears in the opening

Notes

1 – After approximately 10 to 15 years of intensive use of a roller shutter, natural wear and tear will cause damage to the slats, profile and panels.

The part of the armour that operates within the guide rail becomes damaged, and this is generally invisible to the gate user. Although the gate continues to open and close as if normally, we are unknowingly shortening the motor’s service life, as this type of damage causes additional resistance which, during the gate’s operation, translates into an increased load on the motor. Admittedly, a well-designed and correctly selected motor should have a power reserve of around 20–30% of its rated capacity, but it should not be operating under extreme load all the time. .

2 – If, for example, only one hanger is damaged, the door will of course continue to operate for a while, but ignoring this will cause the remaining hangers to break. In this case, no safety measures will help; the door will fall down. Therefore, book a visit from our service technician to extend the gate’s service life and ensure it operates without faults.

Price list

Regarding garage roller shutters

Zone 1:
Travel cost to client = £120.00/net
Cost of minor fault = £160.00/item/net
Cost of more serious repair = priced on site
+ cost of replaced parts

Zone 2
Cost of travel to the client = £160.00/net
The cost of a minor repair = £200.00/1 pc/net
Cost of more serious repair = priced on site
+ cost of replaced parts

On public holidays + 50% The cost of repairing industrial doors is quoted on a case-by-case basis.

We operate in
We provide our repair services primarily for Silesia in cities such as 

Zone 1

Bytom, Piekary Śląskie, Radzionków, Tarnowskie Góry, Świerklaniec, Orzech, Nakło Śląskie, Nowe Chechło, Kalety, Woźniki, Koziegłowy, Miasteczko Śląskie, Pyrzowice, Mierzęcice, Siewierz, Zawiercie, Sławków, Dąbrowa Górnicza, Siemianowice Śląskie, Psary, Będzin, Jaworzno, Mysłowice, Giszowiec, Katowice, Chorzów,
Chorzów Batory, Świętochłowice, Panewniki, Mikołów, Chrzanów, Tychy, Lędziny, Łaziska Górne, Orzesze, Ornontowice, Chudów, Paniówki, Przyszowice, Knurów, Czerwionka-Leszczyny, Wilcza, Stanica, Rudy, Bargłówka, Smolnica, Łabędy, Smolnica, Żernica, Sośnicowice, Kleszczów, Gliwice, Szałsza, Czekanów, Ziemięcice, Wieszowa, Ruda Śląska, Chebzie, Halemba, Kochłowice, Wirek, Nowy Bytom, Zabrze, Mikulczyce, Helenka, Stolarzowice, Górniki, Repty, Miechowice, Szombierki, Radzionków, Rokitnica, Grzybowice, Świętoszowice, Zbrosławice, Ptakowice, Laryszów, Miedary.,

Zone 2

Rybnik, Żory, Wodzisław Śląski, Jastrzębie Zdrój, Pszczyna, Czechowice-Dziedzice, Bielsko-Biała, Skoczów, Szczyrk, Żywiec, Kęty, Wadowice, Myślenice, Oświęcim, Wieliczka, Kraków, Olkusz, Wolbrom, Szczekociny, Koniecpol, Myszków, Żarki, Olsztyn, Częstochowa, Lubliniec,
Kędzierzyn-Koźle, Zdzieszowice, Krapkowice, Strzelce Opolskie, Głogówek, Głubczyce, Racibórz